All tests / DualSense Edge Test

DualSense Edge Test

Connect your DualSense Edge with USB-C or Bluetooth, press a button and run the drift test. The Edge's sticks are replaceable modules — so a bad result has an easy fix.

Runs 100% in your browserFree, no sign-upInstant diagnosis

Testing the back buttons and Fn controls

The Edge's back buttons don't have their own signal: the controller sends whatever button you assigned to them in the PS5's controller profile. Press a back button and the assigned button lights up here. The Fn buttons switch profiles on the controller itself and don't show up in a browser.

Drift on a DualSense Edge? Swap the module

  1. Run the drift test. Above 12% on one stick means that module is worn.
  2. Remove the front faceplate (press the release button on the back) and lift the stick module lever.
  3. Pull the module out and insert a replacement — no tools or soldering needed.
  4. Retest here: drift should be below 5%.

Trigger stops

The Edge has three trigger stop positions. With a shorter stop L2 and R2 can't reach 100% — that's expected. Set the stops to the longest position before testing trigger range.

Frequently asked questions

Can I test a DualSense Edge without a PS5?

Yes. Any PC, Mac or Chromebook with a browser works over USB-C or Bluetooth.

Why does my back button show up as another button?

That's how the Edge works: back buttons send the button assigned in your profile. Change the assignment on the PS5 under Settings → Accessories → Controllers.