All tests / Joy-Con Drift Test

Joy-Con Drift Test

Pair a Joy-Con with your computer over Bluetooth, press a button and leave the stick alone. In three seconds you know exactly how much it drifts.

Runs 100% in your browserFree, no sign-upInstant diagnosis

Pairing Joy-Cons with a computer

  1. Slide the Joy-Con off the Switch.
  2. Hold the small sync button on the rail until the green lights run back and forth.
  3. Open Bluetooth settings on your computer and select Joy-Con (L) or Joy-Con (R).
  4. Press any button here. Depending on the browser, each Joy-Con appears as its own controller or as one combined pad.

Fixing Joy-Con drift

  1. Update the controllers on the Switch: System Settings → Controllers and Sensors → Update Controllers.
  2. Recalibrate: System Settings → Controllers and Sensors → Calibrate Control Sticks.
  3. Clean around the stick base with compressed air while moving the stick.
  4. Nintendo has repaired Joy-Con drift free of charge in many regions — check Nintendo Support for your country before paying for a repair.
  5. Replacement stick modules (including Hall-effect ones) are available if you're comfortable opening the Joy-Con.

Frequently asked questions

How much drift is too much on a Joy-Con?

Below 5% is normal and hidden by games. Above 12% you'll see characters or menus move by themselves.

Can I test Joy-Cons attached to the Switch?

Not in a browser. Use the Switch's own calibration screen, or test each Joy-Con on a computer here.