How to test your controller
- Connect the controller with a USB cable or Bluetooth.
- Press any button so your browser detects it (browsers only show controllers after the first press).
- Press every button once — the checklist fills up as you go.
- Click Measure drift and leave the sticks alone for 3 seconds.
- Click Circularity test and roll each stick slowly around its edge a few times.
- Squeeze both triggers all the way in, then read the diagnosis on the right.
What the results mean
| Result | Good | Problem |
|---|---|---|
| Resting drift | Below 5% | Above 12% = stick drift |
| Circularity error | Below 10% | Above 15% = worn or misaligned stick |
| Trigger range | Reaches 100% | Stops below 95% = worn sensor or bad calibration |
| Stuck buttons | None | Button reads pressed without touching it |
Why we're different
Most testers show raw numbers and leave you guessing. This one turns the numbers into a verdict — good, mild drift or needs repair — with step-by-step fixes for your exact controller, from recalibrating and deadzone settings to cleaning the stick module. Nothing is installed and nothing leaves your device.
Frequently asked questions
Why doesn't my controller show up?
Press any button after connecting — browsers only reveal a gamepad after the first input. If it still doesn't appear, try a different USB cable (some only charge), use Chrome or Edge, and close apps such as Steam that can take control of the gamepad.
What is stick drift?
Stick drift is when the analog stick reports movement while you're not touching it. It's caused by wear or dirt in the stick's sensors. Our drift test measures how far the stick sits from center at rest.
Does this work with PS5, Xbox and Switch controllers?
Yes. DualSense, DualShock 4, Xbox One/Series, Switch Pro and most PC gamepads work over USB or Bluetooth in Chrome, Edge, Firefox and Safari.
Can I test vibration?
Yes, in browsers that support controller rumble (Chrome and Edge). Use the vibration buttons under the controller.