All tests / PS5 Controller Test

PS5 DualSense Controller Test

Connect your DualSense to a PC or Mac with USB-C or Bluetooth and press the PS button. We test all 17 inputs, measure drift on both sticks and check that L2/R2 reach their full range.

Runs 100% in your browserFree, no sign-upInstant diagnosis

How to connect a DualSense to your computer

  1. USB: plug in a USB-C data cable (the one that came with the PS5 works).
  2. Bluetooth: hold PS + Create until the light bar flashes, then pair it in your computer's Bluetooth settings.
  3. Press any button on this page and the test starts.

Common DualSense problems

  • Left stick drift — the most common DualSense fault, usually caused by wear in the stick's potentiometers.
  • L2/R2 not reaching 100% — often a calibration issue; a reset (pin hole on the back, 5 seconds) can help.
  • Buttons not registering — sticky residue under the face buttons.

Fixing drift on a DualSense

  1. Reset the controller: press the small button in the hole on the back for 5 seconds.
  2. Update the controller firmware on the PS5 (Settings → Accessories → Controllers).
  3. Blow compressed air around the base of the stick while rotating it.
  4. Raise the in-game deadzone if the drift is mild.
  5. If drift is above 12% after all of this, the stick module needs replacing or a repair.

Frequently asked questions

Can I test a PS5 controller without a PS5?

Yes. Any PC, Mac or Chromebook with a browser works. Connect with USB-C or Bluetooth and press a button.

Does the test check the adaptive triggers?

We test the full analog range of L2 and R2. The adaptive resistance motors can only be controlled by a PS5 or by native software.

Is DualSense Edge supported?

Yes, the Edge works like a standard DualSense; the back buttons are mapped by the controller itself.