All tests / Headphone Test

Headphone Test

Put your headphones on, keep the volume low and play each side. Tell us where you hear it and we find swapped, dead or mono channels, then test bass and treble.

Runs 100% in your browserFree, no sign-upInstant diagnosis

How to test headphones

  1. Turn the volume down to about 20% before you put the headphones on.
  2. Play Left and Right and answer where you heard each sound.
  3. Run the bass limit test and click the moment the tone disappears.
  4. Play the full sweep and listen for buzzing, crackling or one side dropping out.

Common headphone problems

SymptomLikely cause
One side silentBroken wire near the plug or earcup, or the balance slider is set to one side
Sound on both sides for LeftMono audio is on in accessibility settings
One side quieterEarwax or dust on the mesh (earbuds), or a damaged driver
Crackling when you move the cableWorn cable or loose 3.5 mm plug

Wireless headphones and earbuds

Bluetooth headphones switch to a lower quality mode when their microphone is in use (calls, Discord, Teams). If music suddenly sounds flat, close apps that use the microphone or pick the headphones' stereo output instead of the 'Hands-Free' one.

Frequently asked questions

How do I know which side is left?

Look for an L and R mark on the headband, inside the earcup or on the earbud stem. Most headphones also have a small bump or a longer cable on the left side.

Why can't I hear the highest tones?

Hearing above 15–16 kHz fades naturally with age, so the treble limit often measures your ears rather than the headphones. Compare with someone younger if you're unsure.

Is it safe to play the sweep?

Yes at low volume. Very low and very high tones at high volume are uncomfortable and not good for your hearing.