All tests / Mechanical Keyboard Test

Mechanical Keyboard Test

Press every key, then hammer the ones you suspect. We flag switch chatter — one press arriving as two — and measure how many keys your board registers at once.

Runs 100% in your browserFree, no sign-upInstant diagnosis

Fixing key chatter

  1. Raise the debounce time in your keyboard's software or firmware (VIA, QMK, or the brand's app) — 5 to 10 ms fixes most chatter.
  2. Blow out the switch with compressed air or a few presses after removing the keycap.
  3. Hot-swap boards: pull the switch and replace it, or check for a bent pin.
  4. Soldered boards: reflow or replace the switch.

Rollover: 6KRO vs NKRO

Many keyboards in USB mode register up to six keys plus modifiers (6KRO). N-key rollover (NKRO) boards register every key at once. Hold as many keys as you can — the rollover counter shows your board's real limit.

Frequently asked questions

Does it test stabilizer rattle?

No — rattle is a sound, not a signal. Listen while pressing Space, Enter and Shift.

Do optical or Hall-effect switches chatter?

Very rarely. They don't use metal contacts, which is where chatter comes from.